Analisa Tegangan Maksimal Cutter Planer pada Mesin Serut (Planer) Bambu Modular dengan Metode Elemen Hingga
DOI:
https://doi.org/10.30588/jeemm.v7i2.1572Keywords:
Cutter, Explicit Dynamics, Numerical MethodAbstract
The cutter planer is one of the main components of a bamboo planer which functions to flatten the surface of the bamboo blades. The cutter planer has a problem, namely the maximum stress is not known due to the complexity of the components which is difficult to analyze using the mechanical equation calculation method, so that to overcome this problem a numerical method is used, namely the finite element method. In this study, an analysis was carried out on a cutter planer by comparing the process of cutting bamboo slats with two directions of rotation clockwise (CW) and counterclockwise (CCW). The material used in the cutter planer is HSS and bamboo material with petung bamboo. The results of this study show that the highest maximum stress distribution for the cutter occurs in CCW and the lowest maximum stress distribution for the cutter occurs in CW.References
Anton and Angraini, T. (2013), Unjuk Kerja Dan Pemanfaatan Inverter Sebagai Pengendali Kecepatan Motor Induksi 3 Phasa, Elektron : Jurnal Ilmiah, 5(2), pp. 87–92.
Bhonde, D. dkk,. 2014. Physical and Mechanical Properties of Bamboo (Dendrocalmus Strictus), International Journal of Scientific & Engineering Research, Volume 5, Issue 1.
Dermawan, F.A. dan Sulaksono, B., 2020. Perancangan Mesin Serut Bambu untuk Bahan Baku Kertas. In SEMNASTERA (Seminar Nasional Teknologi dan Riset Terapan) (Vol. 2, pp. 360-369).
Eratodi, I.G.L.B. dan Bagus, G.L., 2010. Teknologi Bambu Laminasi Sebagai Material Ramah Lingkungan Tahan Gempa. Konferensi Nasional Teknik Sipil, 4.
Febrian T.W., 2019. Karateristik dan Sifat Fisik Bambu Petung (Dendrocalamus asper.Backer) di Kawasan Hutan Kemasyarakatan (HKM) Desa Aik Bual, Provinsi Nusa Tenggara Barat, Buletin LOUPE Vol. 15 No. 01.
Inggar, S.I., 2012. Rekayasa Bambu Sebagai Solusi Pelestarian Lingkungan. Jurusan Teknik Sipil & Lingkngan Universitas Gadjah Mada.
Jinlong, C., dan Zhenqian, S., 2018. Finite element analysis of static and dynamic characteristics of elevator desk structure based on ANSYS workbench. Journal of Engineering Mechanics and Machinery, 3(1), 14-20.
Kollmann, F. and Cote, W. (1968) Principles of Wood Science and Technology. Volume 1, Solid Wood. Springer-Verlag, New York.
Kosasih, PB., 2012. Teori dan Aplikasi Metode Elemen Hingga. Andi, Yogyakarta.
Larasati, D.; Jules J.A. Jansen; & E.L.C. van Egmond-de Wilde de Ligny. 1999. Uncovering the Green Gold of Indonesia: A Design Research on Bamboo’s Potential. International Network for Bamboo and Rattan, China.
Logan, DL. 2007. A first Course in the finite element method 4th edition. Thomson, University of Wisconsin-plateville.
Marciniak, Z.,et.al., 2002. Mechanics Of Sheet Metal Forming, Butterworth–Heinemann, London.
Sugiyanto. dkk., 2022. Mesin Serut (Planer) Bambu dengan Sistem Modular, Universitas Gadjah Mada.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
