Vol. 7 No. 2 (2023)

Articles

• Delta EC Simulation on Influence of Resonator Length in Close-Open Standing Wave Thermoacoustic Engine

  Rinasa Agistya Anugrah, Andika Wisnujati, Fajar Anggara (Author)

  01-06

  DOI : https://doi.org/10.30588/jeemm.v7i2.1501
  

  • PDF  Views: 145 times |  Download : 60 times

• Studi Permukaan Produk Berbahan PLA Hasil Fabrikasi Menggunakan Mesin 3D Printer Jenis Fused Deposition Modelling (FDM) dengan Variasi Kecepatan Printing

  Satriawan Dini Hariyanto, Nurhayati Nurhayati, I Gusti Gde Badrawada (Author)

  07-12

  DOI : https://doi.org/10.30588/jeemm.v7i2.1575
  

  • PDF  Views: 155 times |  Download : 70 times

• Analisis Kecepatan Putar Silinder Perontok Terhadap Kinerja Mini Power Thresher Hasil Rekayasa UPJA Desa Sungai Kelambu

  Suhendra Suhendra, Deliana Pridaningsih, Lang Jagat, Feby Nopriandy (Author)

  13-19

  DOI : https://doi.org/10.30588/jeemm.v7i2.1513
  

  • PDF  Views: 259 times |  Download : 387 times

• Reducing the Threat of Electrical Hazards through the Application of Solar Energy: Realizing Child-Friendly Electricity in Elementary Schools.

  sutoyo sutoyo, Ferriawan Yudhanto (Author)

  20-26

  DOI : https://doi.org/10.30588/jeemm.v7i2.1529
  

  • PDF  Views: 203 times |  Download : 50 times

• Analisis Kondisi Angin Menggunakan Diagram Windrose Sebagai Potensi Pembangkit Listrik Tenaga Bayu di Kecamatan Percut Sei Tuan Kabupaten Deli Serdang

  Ratni Sirait, Lailatul Husna Lubis, Tasya Noveni (Author)

  27-36

  DOI : https://doi.org/10.30588/jeemm.v7i2.1465
  

  • PDF  Views: 384 times |  Download : 263 times

• Analisa Tegangan Maksimal Cutter Planer pada Mesin Serut (Planer) Bambu Modular dengan Metode Elemen Hingga

  Redho Kurniawan, Ignatius Aris Hendaryanto, Sugiyanto Sugiyanto, Radhian Krisnaputra, Inggar Septhia Irawati (Author)

  37-45

  DOI : https://doi.org/10.30588/jeemm.v7i2.1572
  

  • PDF  Views: 160 times |  Download : 44 times

• Pengaruh Komposisi Partikel Styrofoam dan Resin Epoksi pada Komposit Peredam Suara

  Bima Kusuma Ary Prastianto, Gatut Rubiono, Ikhwanul Qiram (Author)

  46-54

  DOI : https://doi.org/10.30588/jeemm.v7i2.1593
  

  • PDF  Views: 289 times |  Download : 86 times

• Optimization of Cutting Parameter CNC Wet Milling Process of Austenitic Stainless Steel on Surface Roughness

  Achmad Hata, Rudy Yuni Widiatmoko, Deni Mulyana, Ilham Azmy (Author)

  55-62

  DOI : https://doi.org/10.30588/jeemm.v7i2.1591
  

  • PDF  Views: 170 times |  Download : 50 times

• Rancang Bangun Pompa Air Aliran Aksial Pipa Pvc 5 Inci Berpenggerak Motor Listrik

  Rendi Rendi, Muhammad Firman, Budi Hartadi (Author)

  63-69

  DOI : https://doi.org/10.30588/jeemm.v7i2.1613
  

  • PDF  Views: 317 times |  Download : 171 times

• Analisis dan Perancangan Alat Biogas Sebagai Energi Alternatif Skala Rumah Tangga Dalam Pemanfaatan Limbah Kotoran Sapi

  Jainal Arifin, Firda Herlina, Ahmadil Amin, Hendi Cahya Iman (Author)

  70-77

  DOI : https://doi.org/10.30588/jeemm.v7i2.1610
  

  • PDF  Views: 265 times |  Download : 186 times

• Identifikasi Aliran Energi Listrik pada Mesin CNC Machining Center

  Sony Harbintoro, Rafika Ratik Srimurni (Author)

  78-85

  DOI : https://doi.org/10.30588/jeemm.v7i2.1598
  

  • PDF  Views: 150 times |  Download : 65 times

• Pengendalian Kualitas Produk Menggunakan Lean Six Sigma dan Fuzzy FMEA Dalam Upaya Menekan Kecacatan Produk

  Nada Iman Muvidah, Elly Wuryaningtyas Yunitasari, Kusmendar Kusmendar (Author)

  86-95

  DOI : https://doi.org/10.30588/jeemm.v7i2.1617
  

  • PDF  Views: 549 times |  Download : 219 times