Desain Pencacah Serabut Kelapa dengan Penggerak Motor Listrik
DOI:
https://doi.org/10.30588/jeemm.v3i1.494Keywords:
engine diesel, electric motor drive, designAbstract
Diesel Motor is a type of piston combustion motor commonly called Ignition Compression Engine Combustion Engine. The use of coconut fiber chopper machines using diesel drive engines in the market has not been able to increase consumer comfort and efficiency. Because of this issue that emits CO2 and NOx also causes air pollution and noise emissions, it tends to be relatively large and also requires intensive care that requires a lot of space and costs. This will renew the surrounding environment and allow user comfort and efficiency when running the machine. Therefore, it is necessary to have an efficient and optimal coconut fiber chopping machine by reducing noise so that it is not noisy and pollution-free. The coconut fiber enumerator with an electric motor drive is an enumerator of coconut fibers with an electric motor as a solution for making household products and agricultural fertilizers to increase comfort and efficiency for consumers so as to increase economic value in the community. This research method begins with making a tool consisting of a study of literature, measuring each component of the tool consisting of a frame, eye drive, motor drive, filter and pulley and designing the design model. Trial on a no-load blade shaft rotation of 450 rpm. At the time of enumeration, the shaft rotation is reduced to around 350-400 rpm and the linear velocity of the V-Belt is 3.9 m / s. From the coconut fiber chopper with an electric motor drive it causes low vibration, does not cause pollution nor is it efficient.
References
Anggraeni, N. D., & Latief, A. E. (2018). Rancang Bangun Mesin Pencacah Plastik Tipe Gunting. Jurnal Rekayasa Hijau, Vol. 2(2), 185-190.
Apriani, E. (2017). Analisa Pengaruh Variasi Komposisi Bahan Limbah dari Serat Kelapa Muda, Batang Pisang dan Kertas Bekas Terhadap Kekuatan Bending Sebagai Papan Komposit. Jurnal Engine: Energi, Manufaktur, dan Material, Vol. 1(2), 38-46.
Frick, H., & Koesmartadi, C. (2012). Ilmu Bahan Bangunan. (Cetakan ke-10). Yogykarta: Penerbit Kanisius.
Napitupulu, R., Subkhan, M., & Nita, L. D. (2011). Rancang Bangun Mesin Pencacah Sampah Plastik. Jurnal Manutech, Vol. 3(1), 1-5.
Putra, N., Koestoer, R. A., Adhitya, M., Roekettino, A. & Trianto, B. (2009). Potensi Pembangkit Daya Termoelektrik Untuk Kendaraan Hibrid. Makara Journal of Technology, Vol. 13(2), 53–58.
Soekardi, Y. (2012). Pemanfaatan & Pengolahan Kelapa. Bandung: Yrama Widya
Sugiyanto, S., & Trisnowati, J. (2018). Rancang Bangun Mesin Perajang Kerupuk Jengkol Untuk Meningkatkan Pendapatan UKM. Jurnal Engine: Energi, Manufaktur, dan Material, Vol. 2(2), 25-30.
Sutowo, C., & Diniardi, E. (2010). Perencanaan Mesin Penghancur Plastik Kapasitas 30 kg/jam. Sintek Jurnal: Jurnal Ilmiah Teknik Mesin, Vol. 4(2), 39-49.
Syamsiro, M., Hadiyanto, A. N., & Mufrodi, Z. (2016). Rancang Bangun Mesin Pencacah Plastik Sebagai Bahan Baku Mesin Pirolisis Skala Komunal. Jurnal Mekanika dan Sistem Termal (JMST), Vol. 1(2), 43-48.
Yetri, Y., Sawir, H., & Hidayati, R. (2016). Rancang Bangun Mesin Pencacah Sampah dan Limbah Plastik. Seminar Nasional Pengabdian kepada Masyarakat, Vol. 1.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
