Performance Analysis of Plastic Bottle Crushing Machine with Electric Motor Drive

Authors

  • Rinasa Agistya Anugrah Department of Mechanical Technology, Universitas Muhammadiyah Yogyakarta
  • Zuhri Nurisna Department of Mechanical Technology, Universitas Muhammadiyah Yogyakarta
  • Fandi Widiyanto Department of Mechanical Technology, Universitas Muhammadiyah Yogyakarta
  • Aziz Abdul Latif Department of Mechanical Technology, Universitas Muhammadiyah Yogyakarta

DOI:

https://doi.org/10.30588/jeemm.v4i1.716

Keywords:

crushing machine, plastic bottle, efficiency, working capacity, electrical energy, performance

Abstract

Garbage is now very possible to be recycled. One way to help the recycling process is to make a plastic bottle crushing machine. In this study,the test material is a plastic bottle with a thickness of 0.1 mm. Then we calculated the engine capacity, electrical energy, the profit of production costs, the comparison of the efficiency of the electric motor drive compared to the gasoline engine drive, the rotation of the blade, and linear velocity v-belt. This study's results were that the smaller modifiedmachinescould crush plastic bottles into crushed plastic with a length smaller than 20 mm as much as 27.93 kg/hour. The comparison efficiency of using a plastic bottle crushing machine with an electricmotor drive witha gasoline motor drive is 2.6:1. It can be concluded that the plastic bottle crushing machine with an electric motor drive is superior to those witha gasoline engine drive.

References

Ahmadinia, E., Zargar, M., Karim, M. R., Abdelaziz, M., & Shafigh, P. (2011). Using waste plastic bottles as additive for stone mastic asphalt. Materials & Design, 32(10), 4844-4849. doi:https://doi.org/10.1016/j.matdes.2011.06.016

Azhari, C., & Maulana, D. (2018). Perancangan Mesin Pencacah Plastik Tipe Crusher Kapasitas 50 kg/jam. Jurnal Isu Teknologi STT Mandala, 13(2), 7-14.

Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science Advances, 3(7), e170078. doi:https://doi.org/10.1126/sciadv.1700782

Junaidi, J., Nur, I., Nofriadi, N., & Rusmardi, R. (2015). Pengembangan Mesin Pencacah Sampah/Limbah Plastik dengan Sistem Crusher dan Silinder Pemotong Tipe Reel. Jurnal Ilmiah Poli Rekayasa, 10(2), 66-73. doi:https://doi.org/10.30630/jipr.10.2.12

Orhorhoro, E. K., Ikpe, A. E., & Tamuno, R. I. (2016). Performance Analysis of Locally Design Plastic Crushing Machine for Domestic and Industrial Use in Nigeria. European Journal of Engineering Research & Science, 1(2), 26-30.

Rachmawati, P. (2019). Rancang Bangun Mesin Perajang Singkong yang Memenuhi Aspek Ergonomis untuk Meningkatkan Produktivitas Pekerja. Jurnal Engine: Energi, Manufaktur, dan Material, 3(2), 66-72. doi:https://doi.org/10.30588/jeemm.v3i2.581

Sutowo, C., Diniardi, E., & Yanto, M. (2010). Perencanaan Mesin Penghancur Plastik Kapasitas 30 kg/jam. Sintek Jurnal, 4(2), 39-49.

Syamsiro, M., Hadiyanto, A. N., & Mufrodi, Z. (2016). Rancang Bangun Mesin Pencacah Plastik Sebagai Bahan Baku Mesin Pirolisis Skala Komunal. Jurnal Mekanika dan Sistem Termal, 1(2), 43-48.

Upingo, H., Djamalu, Y., & Botutihe, S. (2016). Optimalisasi Mesin Pencacah Plastik Otomatis. Jurnal Teknologi Pertanian Gorontalo, 1(2), 112-139.

Yahya, M. (2017). Desain Mesin Pencacah Botol Plastik Menggunakan Tenaga Surya. Surakarta: Skripsi Jurusan Teknik Elektro, Universitas Muhammadiyah Surakarta.

Downloads

Published

2020-05-30

How to Cite

Anugrah, R. A., Nurisna, Z., Widiyanto, F., & Latif, A. A. (2020). Performance Analysis of Plastic Bottle Crushing Machine with Electric Motor Drive. Jurnal Engine: Energi, Manufaktur, Dan Material, 4(1), 14–19. https://doi.org/10.30588/jeemm.v4i1.716

Issue

Section

Articles

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.