Perancangan Shaking Rig Simulator Irregularities Sarana dan Prasarana Kereta Api
DOI:
https://doi.org/10.30588/jeemm.v8i2.1980Keywords:
Shaking Rig, Vibration Testing, Train, AccelerometerAbstract
The train is one of the main modes of transportation used in various countries in the world, including Indonesia. The existence of an efficient railway network can support the mobility of people and goods. The safety and comfort of train travel is highly dependent on the condition of the railway facilities and infrastructure. The condition of facilities and infrastructure that meet standards will make the journey smoother and reduce the risk of accidents. With human mobility, the development of public transportation using trains in Indonesia also continues to increase. Damage to train tracks can cause disruption to comfort and endanger safety caused by excessive vibration during train travel, so regular maintenance and repair of the rails is required using a system called the Intelligent Railway Vibration Monitoring System (IRV-MS). The IRV-MS system still needs to be tested because the resulting vibration readings still require validation. The design of this shaking rig simulator is expected to be a solution in terms of vibration testing. This shaking rig can move in a vertical or horizontal linear direction with a linear motor as a driver and produce oscillatory movements. The design of this shaking rig simulator tool uses Solidworks software with 500 mm x 423 mm x 380 mm of dimension and later vibration animation will be simulated in the motion study feature in the software with input parameters of 3-10 Hz with a maximum stroke of 20 mm.
References
Alavudeen, A., & Venkateshwaran, N. (2018). Computer Aided Design and Manufacturing. New Delhi: Laxmi Publications.
Badri, A. (2019). Performance Improvement of MEMS Accelerometers in Vibration Based Diagnosis. The University of Manchester (United Kingdom).
Charisma, G.E., (2021). Pengembangan Instrumented Railway Vehicle (IRV) Berbasis Pengukuran GetaranMenggunakan Sensor Accelerometer (Bachelor dissertation, Universitas Gadjah Mada).
Claus, W. Schiehlen (2018). Modeling and simulation of railway bogie structural vibrations,Vehicle System Dynamics, 28 (2018) 538-552.
Costrada, A. N., & Harmadi, H. (2019). Rancang Bangun Sistem Peringatan Dini Pada Perlintasan Kereta Api Berbasis Sensor Serat Optik dan Transceiver nRF24L01+. Jurnal Fisika Unand, 8(3), 234-239.
Dr. Fritz Faulhaber GmbH & Co. KG. (2024). Series LM 1247 ... 11. [online] https://www.faulhaber.com/en/productsseries/lm-124711/ [Accessed 18 Sep. 2024].
Dr. Fritz Faulhaber GmbH & Co. KG. (2024). Series LM 1483 ... 11. [online] https://www.faulhaber.com/en/products/series/lm-148311/ [Accessed 20 Sep. 2024].
Dr. Fritz Faulhaber GmbH & Co. KG. (2024). Series LM 2070 ... 11. [online] https://www.faulhaber.com/en/products series/lm-207011/ [Accessed 20 Sep. 2024].
Dumitru, M., Gheţi, M.A. (2015). Evaluation of The Ride Quality and Ride Comfort in Railway Vehicles Based on the Index Wz. ANNALS of Faculty Engineering Hunedoara – International Journal of Engineering Tome XIII, 3, 123-132. Diakses dari https://researchgate.net
Era, Yulisaputro., (2021) Perancangan Sistem Transmisi Pada Alat Uji Bearing Kereta Api Pasca Perawatan Berbasis Pengukuran Getaran (Bachelor Dissertation,Universitas Gadjah Mada)
Hamid, A. (2018). Praktikal vibrasi mekanik: Teori dan praktik(1). Yogyakarta: Graha Ilmu.
Ihlas, A. (2017). Analisis kerusakan rel kereta api angkutan batubara. Jurnal Teknologi Bahan dan Barang Teknik, 7(1), 7-16.
Inven Sense. (2016). MPU-6000 and MPU-6050 product specification revision 3.4. CA : Inven Sense Inc. Diakses dari https://invensense.tdk.com/
Khan, S. (2019). Analysis of Linear Motion in Mechanics. International Journal ofScientific and Engineering Research, 10(5), 1672-1676.
Kusuma, D.T. (2021). Fast fourier transform (fft) dalam transformasi sinyal frekuensi suara sebagai upaya perolehan average energy (ae) musik. Jurnal Pengkajian dan Penerapan Teknik Informatika.
Liu, Z., Lin, W., Yu, X., Rodríguez-Andina, J. J., & Gao, H. (2023). Approximation-Free Robust Synchronization Control for Dual-Linear-Motors-Driven Systems with Uncertainties and Disturbances. IEEE Transactions on Industrial Electronics.
Mario, RW. (2024). Pembuatan Vibration Testing Rig Untuk Pengujian IRV-MS. (Bachelor dissertation, Universitas Gadjah Mada).
Nishitani, K., Kondo, M., (2019). Application of a condition monitoring system through vibration to railway vehicles in operation. Japanese Railway.
Pahl and W. Beitz, (2016). Engineering Design : A Systematic Approach.
Rusianto, T., Susastriawan, A.A.P., (2021). Getaran pada Kereta.
Serway, R. A., & Jewett, J. W. (2018). Physics for Scientists and Engineers. Cengage Learning.
Simmons, C. H., & Maguire, D. E. (2019) Manual of Engineering Drawing: Technical Product Specification and Documentation to British and International Standards. Amsterdam: Elsevier.
Solidworks.com. (2021). Introduction to Motion Studies - SOLIDWORKSHelp.
Teng, F., Zhu, R., Zhou, Y., Chi, M., Zhang, H., (2021). A lightweight model of wheel-rail force inversion for railway vehicles, in: Concurrency Computation.https://doi.org/10.1002/cpe.6443
Wang, J., & Zhang, C. (2017). Dynamics of Mechanical Systems. Journal of Applied Mechanics, 84(6), 061013.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Paresya Arva Seta, Agustinus Winarno, Budi Basuki, Ignatius Aris Hendaryanto (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
