Pengaruh Perubahan Diameter Lubang Saluran Keluar Jetmain dari 2,5 mm menjadi 2,8 mm pada Karburator terhadap Kinerja Mesin Bensin Empat Langkah Satu Silinder pada Sepeda Motor

Authors

  • Wardoyo Wardoyo Universitas Proklamasi 45 Yogyakarta
  • Andi Putro Sukendro Universitas Proklamasi 45 Yogyakarta

DOI:

https://doi.org/10.30588/jeemm.v1i1.224

Keywords:

main jet, fuel, power

Abstract

This study aimed to compare the influence of the hole diameter of the outlet of the main jet from 2.5 mm to 2.8 mm on the carburetor to the engine performance and fuel consumption.The test is performed with the brand gasoline motor honda tiger type GL 200 R  four-stroke single cylinder. The materials studied were the main jet. Tests performed with standard conditions in without making any changes. Testing machine at the ready on a dynamometers test bed. Then do the testing phase and retrieval of data that is torque and fuel consumption. Torque (Nm) play a modified jet yield increase of 2.2% from the main jet standard. Power (kW) jet modification produces a maximum power of around 2.2% of the main jet standard. The rate of fuel consumption (mf) on the main jet modification is greater than the main jet standard. Fuel consumption (sfc) on the main jet modification will further increase the standard of the main jet. Calorific fuel (Qi) in the main jet modification is greater than the main jet standard. Jet played modifications that do not significantly change the main jet standard.

References

Arends, B. P. M. & Berenscot, H. (1980). Motor Bensin. (Alih Bahasa: Sukrisno, U.) Jakarta: Penerbit Erlangga.

Arismunandar, W. (2002). Penggerak Mula Motor Bakar Torak. Bandung: ITB Bandung.

Cengel, Y. A. & Boles, M. A. (1994). Thermodynamics: an Engineering Approach. New York: McGraw-Hill.

Daryanto. (2003). Motor Bensin pada Mobil. Bandung: Yrama Widya.

Ferguson, C. R. (1986). Internal Combustion Engines: Applied Thermosciences, Purdue University.

Heywood, L. B. (1988). Internal Combustion Engine Fundamentals. Singapore: McGraw-Hill.

Maleev, V. L. (1973). International Critical Tables (Vol. 1). New York: McGraw-Hill.

Obert, F.E. (1973). Internal Combustion Engines and Air Pollution (3rd Edition). New York: Harper & Row Publishing.

Timing. (2006). Manifold Powerman. Motor Plus Edisi 326.

Edwin. (2004). Manifold Powerman. Komoditas Honda Tiger Indonesia.

Downloads

Published

2017-05-31

How to Cite

Wardoyo, W., & Sukendro, A. P. (2017). Pengaruh Perubahan Diameter Lubang Saluran Keluar Jetmain dari 2,5 mm menjadi 2,8 mm pada Karburator terhadap Kinerja Mesin Bensin Empat Langkah Satu Silinder pada Sepeda Motor. Jurnal Engine: Energi, Manufaktur, Dan Material, 1(1), 11–19. https://doi.org/10.30588/jeemm.v1i1.224

Issue

Vol. 1 No. 1 (2017)

Section

Articles

License

Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms: 

Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).