Efek Sinergis Alumina Trihydrate Dan Melamine Cyanurate Terhadap Ketahanan Api Glass Fiber Reinforced Polymer (GFRP)

Authors

  • Ridha Inayah Politeknik Perkapalan Negeri Surabaya
  • Wiwik Dwi Pratiwi Politeknik Perkapalan Negeri Surabaya
  • Rizal Indrawan Politeknik Perkapalan Negeri Surabaya

DOI:

https://doi.org/10.30588/jeemm.v7i1.1463

Keywords:

Burning Test, Hand Lay Up, Alumina Trihydrate, Melamine Cyanurat, Train

Abstract

Glass Fiber Reinforced Polymer (GFRP) in train interior components must have good fire resistance properties. Therefore, it is necessary to add a flame retardant compound to the GFRP material. In this study, Alumina Trihydrate (ATH) and Melamine Cyanurate (MCA) were mixed into a vinyl ester resin. The method of making GFRP refractory specimens uses the hand lay-up method. GFRP is mixed and tested for fire resistance standard ORE B 106.2. The results obtained after the addition of 25% ATH, a mixture of 25% ATH with 5% MCA, 10% MCA with 25% ATH, and 15% MCA with 25% ATH, 25% ATH in the outer layer, and a mixture of 5% MCA with 25% ATH in the outer layer of the resin weight is able to increase fire resistance. Optimum GFRP fire resistance at the addition of 25% ATH to the weight of the resin in the outer layer. The result of the burned area is 84.84 cm² with a fire extinguishing time of 0.33 seconds after the fire source leaves the specimen. The results show that the mixture of ATH and MCA has a synergistic effect on fire resistance properties, so it becomes a recommendation for interior sidewall panels and ceiling panels on trains according to the ORE B 106.2 standard

References

Apriani, E. (2017). Analisa Pengaruh Variasi Komposisi Bahan Limbah dari Serat Kelapa Muda, Batang Pisang dan Kertas bekas terhadap Kekuatan Bending sebagai Papan Komposit. Jurnal ENGINE: Energi, Manufaktur, dan Material, Vol. 1(2), hal: 38-46.

Girish , S., Devendra, K., & Bharath, K. (2016). Effect of Sodium bicarbonate on Fire behaviour of. IOP Conference Series: Materials Science and Engineering.

Hikmiyah, J. (2021). ANALISIS PENGARUH PENAMBAHAN SENYAWA FIRE RETARDANT TERHADAP SIFAT KETAHANAN API, KEKUATAN, KEULETAN DAN KEKAKUAN GLASS FIBER REINFORCED POLYMER (GFRP). Tugas Akhir.

Huang, H., Zhang, K., Jiang, J., Li, J., & Liu, Y. (2016). Highly dispersed melamine cyanurate flame-retardant epoxy resin composites. Society of Chemical Industry.

Huang, X., Tian, Z., Zhang, D., Jing, Q., & Li,J. (2019). The synergetic effect of antimony (Sb2O3) and melamine cyanurate (MCA) on the fame retardant behavior of silicon rubber. Polymer Bulletin.

Kusumawati, A. D. (2012). PENGARUH PERLAKUAN SIKLIS TERMAL TERHADAP SIFAT BIOKOMPOSIT LPP-KENAF MENGANDUNG PEMADAM NYALA Al(OH)3, Mg(OH)2 DAN H3BO3.

Nurhidayat, A. (2017). ANALISA KEKUATAN MEKANIK DAN KETAHANAN FISIK KOMPOSIT GEOPOLIMER AKIBAT FRAKSI BERAT CLAY- RIPOXY SEBAGAI BAHAN INTERIOR OTOMOTIF. ProsidingSNATIF.

Siregar, H. A., Setyawan, A. B., & Marasabessy, A. (2016). KOMPOSIT FIBER REINFORCED PLASTIC SEBAGAI MATERIAL BODI KAPAL BERBASIS FIBERGLASS TAHAN API. BINA TEKNIKA, Volume 12 Nomor 2.

Shekarchi, M., Farahani, M. E., Yekranginia, M., & Ozbakkaloglu, T. (2020). Mechanical strength of CFRP and GFRP composites filled with APP fire retardant powder exposed to elevated temperature. Fire Safety Journal.

Shen, Q. Z., Chen, L., Lin, L., Deng, L. C.,Zhao, J., &Wang, Z. Y. (2013). Synergistic Effect of Layered Nanofillers in Intumescent FlameRetardant EPDM: Montmorillonite versus LayeredDouble Hydroxides. Industrial & Engineering Chemistry Research.

Xu, S., Li, J., Ye, Q., Shen, L., & Lin, H. (2021). Flame-retardant ethylene vinyl acetate Composite materials by combining additions of aluminum hydroxide and melamine cyanurate: Preparation and characteristic evaluations. Journal. of Colloid and Interface Science, 525-531.

Downloads

Additional Files

Published

2023-05-23

How to Cite

Inayah, R., Pratiwi, W. D., & Indrawan, R. (2023). Efek Sinergis Alumina Trihydrate Dan Melamine Cyanurate Terhadap Ketahanan Api Glass Fiber Reinforced Polymer (GFRP). Jurnal Engine: Energi, Manufaktur, Dan Material, 7(1), 21–27. https://doi.org/10.30588/jeemm.v7i1.1463

Issue

Vol. 7 No. 1 (2023)

Section

Articles

License

Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms: 

Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).