Kajian Analisis dan Kontruksi Menara Pendingin - Review

Teguh Irawan

doi:10.30588/jeemm.v6i1.1003

Kajian Analisis dan Kontruksi Menara Pendingin - Review

Teguh Irawan^(1*),

(1) UNIVERSIATAS RIAU
(*) Corresponding Author

Abstract

A cooling tower is a heat remover device that can be operated to transfer exile heat to the atmosphere. Generally, cooling towers are used to cool centrally flowed water and building cooling. The production process in the industrial world uses many large-scale machines. The process of these machines generates heat as a process of engine work, so it requires a cooling system for the working process. Cooling towers are very important for the industrial world. One of the functions of the cooling tower is as a heat exile around the environment, so it has a very important role in the industrial world. For Example, companies in the chemical sector, one of which is sulfa acid processing, H2O2 factories, and so on. There are different types of cooling towers operating, for example, heat exchangers, chillers, pumps, and compressors. Cooling tower performance depends on the mass flow rate of fluid, hot water temperature, and cold water temperature.

Keywords

Thermal System; Cooling Tower; Ansys Simulation

Full Text:

PDF

References

Afshari, F. and H. Dehghanpour (2019). "A Review Study On Cooling Towers; Types, Performance and Application." ALKÜ Fen Bilimleri Dergisi: 1-10.

Chou, M. S. (1973). A comparison of wet type and dry type cooling towers by energy availability methods, Georgia Institute of Technology.

Fisenko, S., et al. (2002). "Evaporative cooling of water in a natural draft cooling tower." International Journal of heat and mass transfer 45(23): 4683-4694.

Hensley, J. C. (1985). Cooling tower fundamentals, Marley Cooling Tower Company.

http://repository.usu.ac.id/bitstream/1234 56789/22673/4/Chapter%20II.pdf.

https://dokumen.tips/documents/jenis- menara-pendingin.html.

https://rmc-indonesia.com/yang-harus- anda-ketahui-tentang-cooling-tower/.

https://www.academia.edu/13174836/ma kalah_cooling_tower.

https://www.slideshare.net/korneliapakidi ng/wet-cooling-tower.

Listyadi, S. and H. Sutjahjono (2014). "Analisis Beban Kalor Cooling tower Induced Draft Counterflow Dengan Bahan Pengisi Bambu Wulung."

Lucas, M., et al. (2009). "Experimental study on the thermal performance of a mechanical cooling tower with different drift eliminators." Energy Conversion and Management 50(3): 490-497.

M.M. El-Wakil, P. p. T., 2nd and M.-H. Edition.

Melkias, A. (2020). "Analisa Performa Pada Cooling Tower Jenis Mechanical Draft Crossflow." JURNAL TEKNIK ENERGI 10(1): 24-28.

Patil, M. M., et al. (2018). "Design and analysis of cooling tower." Int. Res. J. Eng. Technol. 5: 2240-2245.

Triyansah, O. and Y. Witanto (2020). "EFEKTIVITAS COOLING TOWER FAN 6P- 4051–GB. DI PT. PUPUK SRIWIDJAJA SEKTOR STG–BB, PALEMBANG, SUMATERA SELATAN." Rekayasa Mekanika: Mechanical Engineering Scientific Journal, Pure and Inter Disciplinary 4(1): 9-12.

Zou, Z., et al. (2013). "Optimization design of solar enhanced natural draft dry cooling tower." Energy Conversion and Management 76: 945-955.

Putra, R. S. (2015). Analisa perhitungan beban cooling tower pada fluida di mesin injeksi plastik, Universitas Mercu Buana.

Singham, J. (1983). "Cooling towers." Heat exchanger design handbook: 3.12.

Sukamta, S. (2019). "Computational fluid dynamics (CFD) and experimental study of two-phase flow patterns gas-liquid with low viscosity in a horizontal capillary pipe." CFD Letters 11(8): 16-23.

Towers, J. C. (2016). "Cooling technology institute."

DOI: https://doi.org/10.30588/jeemm.v6i1.1003