Prototype of a Dust Monitoring Device in the Mechanical Engineering Laboratory at PGRI University Semarang Using the GP2Y1010AU0F Sensor

Authors

  • Rifki Hermana Universitas PGRI Semarang
  • Muchamad Malik Universitas PGRI Semarang
  • Agus Mukhtar Universitas PGRI Semarang
  • Andrew Joewono Universitas Katolik Widya Mandala Surabaya
  • Gostsa Khusnun Naufal Universitas PGRI Semarang

DOI:

https://doi.org/10.30588/jeemm.v8i2.1999

Keywords:

Sustainability, Sensor, IoT, GP2Y1010AU0F, ESP32

Abstract

ABSTRACT

This study aims to develop an accurate and real-time air quality monitoring system in the Mechanical Engineering Laboratory that provides information on the measured parameter values. The research employs an experimental approach to determine the effectiveness of variables within the experiment. The primary sensor used is the GP2Y1010AU0F Optical Dust Sensor, which operates based on infrared light to measure particulate dust concentration levels. Analysis of sensor testing results was conducted by observing variations in sensor readings, notably after trials involving tissue burnt as a dust source. The dust sensor consistently recorded an average dust concentration of 0.597 Kg/m³. Subsequently, tests were conducted using baby powder with a constant weight of 30 mg per trial. Sensor readings varied between 0.35 Kg/m³ and 0.38 Kg/m³, indicating that within the given weight range, the powder mass does not significantly impact sensor readings. Further, tests on indoor dust density, with an average concentration of 36.01 µg/m³, revealed a relatively low average dust concentration in the room during the measurement period..

References

Fawaiqur, A., Malik, M., & Mansyur, S. (2024). PROTOTYPE SISTEM MONITORING SMART GREEN HOUSE BERBASIS INTERNET OF THINGS (IOT) PADA TANAMAN SELADA. https://ejournal.up45.ac.id/index.php/jtim

Haseeb, K., Ud Din, I., Almogren, A., & Islam, N. (2020). An Energy Efficient and Secure IoT-Based WSN Framework: An Application to Smart Agriculture. Sensors, 20(7), 2081. https://doi.org/10.3390/s20072081

Khalaf, O. I. (2020). Optimization of wireless sensor network coverage using the bee algorithm. Journal of Information Science and Engineering, 36(2), 377–386. https://doi.org/10.6688/JISE.202003_36(2).0015

Li, X., Peng, J., Obaidat, M. S., Wu, F., Khan, M. K., & Chen, C. (2020). A Secure Three-Factor User Authentication Protocol With Forward Secrecy for Wireless Medical Sensor Network Systems. IEEE Systems Journal, 14(1), 39–50. https://doi.org/10.1109/JSYST.2019.2899580

Lv, Z., Hu, B., & Lv, H. (2020). Infrastructure Monitoring and Operation for Smart Cities Based on IoT System. IEEE Transactions on Industrial Informatics, 16(3), 1957–1962. https://doi.org/10.1109/TII.2019.2913535

Putri Nourma Budiarti, R., Maulana, J., Sritrusta Sukaridhoto, dan, Multimedia Kreatif, D., & Elektronika Negeri Surabaya, P. (2018). Aplikasi DIY Smart Trash berbasis IoT Open Platform. In Applied Technology and Computing Science Journal (Vol. 1, Issue 2).

Serper, M., Cubell, A. W., Deleener, M. E., Casher, T. K., Rosenberg, D. J., Whitebloom, D., & Rosin, R. M. (2020). Telemedicine in Liver Disease and Beyond: Can the COVID-19 Crisis Lead to Action? Hepatology (Baltimore, Md.), 215, 0–3. https://doi.org/10.1002/hep.31276

Wisnulaksito, F. A., Sri, M. W., & Tentua, M. N. (2017). Rancang bangun sistem pendeteksi debu berbasis arduino. Dinamika Informatika Volume, 6(2), 31–41.

Zhang, S., Bick, M., Xiao, X., Chen, G., Nashalian, A., & Chen, J. (2021). Leveraging triboelectric nanogenerators for bioengineering. Matter, 4(3), 845–887. https://doi.org/10.1016/j.matt.2021.01.006

Zhu, M., Yi, Z., Yang, B., & Lee, C. (2021). Making use of nanoenergy from human – Nanogenerator and self-powered sensor enabled sustainable wireless IoT sensory systems. Nano Today, 36, 101016. https://doi.org/10.1016/j.nantod.2020.101016

Downloads

Published

2024-11-16

How to Cite

Rifki Hermana, Muchamad Malik, Agus Mukhtar, Andrew Joewono, & Gostsa Khusnun Naufal. (2024). Prototype of a Dust Monitoring Device in the Mechanical Engineering Laboratory at PGRI University Semarang Using the GP2Y1010AU0F Sensor . Jurnal Engine: Energi, Manufaktur, Dan Material, 8(2), 176–189. https://doi.org/10.30588/jeemm.v8i2.1999

Issue

Vol. 8 No. 2 (2024)

Section

Articles

License

Copyright (c) 2024 Rifki Hermana, Muchamad Malik, Agus Mukhtar, Andrew Joewono, Gostsa Khusnun Naufal

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms: 

Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).