Rancang Bangun Cooler Box Termoelektrik dengan Air Sterilizer sebagai Tempat Pengiriman Air Susu Ibu (ASI)
DOI:
https://doi.org/10.30588/jeemm.v3i2.586Keywords:
air sterilizer, cooler box, thermoelectric, uv lightAbstract
The growing trend today is the exclusive breast milk given to the baby until the baby has a sufficient age. This is certainly not too problematic for housewives who most of the time are at home, so it can menyusi baby without interference. But this is different from career women who have babies and want to provide exclusive breast milk, a great distance between home and workplace and time constraints become a barrier factor that makes exclusive breast milk becomes very difficult given career woman to her child. Cooler box can keep asi temperature remain in cold condition prevent damage of breast milk content. Inside the cooler box put ice gel to keep the temperature cool. The ice gel can keep the temperature cool for 3-4 hours. Another problem is the hygiene of the cooler box and storage container from the breast milk. Not infrequently the cooler box into a source of bacteria that can spread to the breast milk contained in the cooler box, this can be caused moisture or from the hands that are not sterile. This is because in the process of pumping and transfer into the cooler box is still using the manual by hand. The researcher will design a cooler box build by using thermoelectric as cooling from cooler box and have water sterilizer, which is useful to decrease the amount of bacteria by using uv light. Low levels of bacteria will make the cooler box becomes more hygienic as a storage area when it will be shipped.
References
Anonim, Cooler box dengan Ice gel, Diakses : 1 Agustus 2016, jam 16.30 dari URL website: http://asibayi.com/arsip/rubbermaid-cooler-box/
Anonim, Cooler box dengan tenaga listrik, Diakses : 1 Agustus 2016, jam 18.30 dari URL website: www.enortec.com.
Anonim, Cooler box, Diakses : 1 Agustus 2016, jam 19.30 dari URL website: www.asibayi.com.
Anonim, Ice gel, Diakses : 1 Agustus 2016, jam 17.00 dari URL website: www.asibayi.com.
Anonim, Modul termoelktrik, Diakses : 1 Agustus 2016, jam 13.30 dari URL website: www.thermoelectric.com.
Anonim, Panjang gelombang dari cahaya, Diakses : 1 Agustus 2016, jam 14.30 dari URL website: ewimg.globalmarket.com.
Anonim, Proses germicidal air pada ruang pasien, Diakses : 1 Agustus 2016, jam 15.30 dari URL website: ww.ultraviol.pl.
Anonim, Susunan dari peltier modul, Diakses : 1 Agustus 2016, jam 17.30 dari URL website: peltiermodules.com.
Anonim, Tempat asi, Diakses : 1 Agustus 2016, jam 18.30 dari URL website: www.asibayi.com.
Burhanuddin, Aan., (2016) Aplikasi Sistem Peringatan Dini pada Kebocoran Gas dan Asap Menggunakan Sensor Gas MQ-7 dengan Program C. Jurnal ENGINE: Energi, Manufaktur, dan Material, Vol. 2(2), hal: 19-24.
Malik,M., Burhanuddin, Aan., (2018) Desain Model Fuzzy Control UAV Berbasis Matlab/Simulink pada Arduino Flight Controller. Jurnal Informatika UPGRIS, Vol. 2(1), hal: 1-7.
M. H. Jali., (2015), Development of Smart Breast Milk Incubator. Scholars Journal of Engineering and Technology (SJET).Universiti Teknikal Malaysia Melaka. Malaysia.
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).