Pengaruh Preheat terhadap Sifat Mekanis Sambungan Metal Inert Gas (MIG) pada Baja Karbon Rendah

Authors

  • Wartono Wartono Institut Teknologi Nasional Yogyakarta
  • Muhammad Taufiq Institut Teknologi Nasional Yogyakarta
  • Abraham Julius Institut Teknologi Nasional Yogyakarta

DOI:

https://doi.org/10.30588/jeemm.v3i1.483

Keywords:

MIG welding, preheat, low carbon steel, mechanical properties

Abstract

The objective of this research is to find out the effect of preheat on mechanical properties of the metal inert gas welding (MIG) on low carbon steel. The welding method uses a MIG welding on a low carbon steel strip plate specimen, in the V angle of 60°, using ER70S-6 electrode wire and CO2 for protection, the variable of this research is a preheat temperature of 100 oC, 200 oC, 300 oC and non-preheat. The test results showed that the highest Vickers hardness value is owned by the preheat 200 oC temperature with Vickers hardness value of 206.674 kg/mm2, the tensile test specimens with preheat 200 oC temperature variations have the greatest tensile strength is the average of 54.87 Kgf/mm2, the value of the highest impact energy on preheat 100 oC of  98.399 Joules.

References

Aji, B. K., & Wijoyo. (2016). Pengaruh Kuat Arus Listrik Terhadap Ketangguhan Impak dan Kekuatan Tarik Sambungan Las MIG Baja Karbon Tinggi. MECHATRONIC AT-AUB, Vol. 10.

Biro Klasifikasi Indonesia. (2006). Rules for Hull Construction Volume II. Jakarta: Biro Klasifikasi Indonesia.

Chandra, A. (2011). Pengaruh Preheating terhadap Ketangguhan dan Struktur Mikro pada Pengelasan Adapter Bucket Excavator dengan Metode Gas Metal Arc Welding (GMAW). Depok: Universitas Indonesia.

Schonmetz, A., & Gruber, K. (1977). Pengetahuan Bahan Dalam Pengerjaan Logam. Bandung: PT. Angkasa.

Wiryosumarto, H., & Okumura, T. (2000). Teknik Pengelasan Logam, (Edisi VII). Jakarta: PT. Pradnya Paramita.

Downloads

Published

2019-05-19

How to Cite

Wartono, W., Taufiq, M., & Julius, A. (2019). Pengaruh Preheat terhadap Sifat Mekanis Sambungan Metal Inert Gas (MIG) pada Baja Karbon Rendah. Jurnal Engine: Energi, Manufaktur, Dan Material, 3(1), 15–22. https://doi.org/10.30588/jeemm.v3i1.483

Issue

Vol. 3 No. 1 (2019)

Section

Articles

License

Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms: 

Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).