Pengaruh Jenis Bahan terhadap Proses Gasifikasi Sampah Organik Menggunakan Updraft Fixed Bed Reactor
DOI:
https://doi.org/10.30588/jeemm.v1i2.258Keywords:
gasification, bagasse, downdraft gasifier, performanceAbstract
Organic wastes has potential as a renewable energy resource. The waste could be converted as a gaseous fuel through gasification method. The objective of this reserach was to study the performance of gasification of various organic waste using fixed bed updraft gasifier especially in term of production of heat and stability of gas production. The raw material that used are rice husk, sawdust pellet, and wood branch. The stabilization of gas production was measurdd based on the time interval of gas could be burnt. The result shows that the kind of biomass has influenced the heating rate and stability of gas production. Sawdust pellet have the biggest burning stabilisation, that is 45 minute of burning time, compare to rice husk that have 15 minute burning time, and wood branch that have 30 minutes burning time. The main problem of gasification of organic waste was less stabilization of gas production due to low material compaction and uncontinuous mass flow.
References
Cahyono, M. S. (2013). Pengaruh Jenis Bahan pada Proses Pirolisis Sampah Organik menjadi Bio-Oil sebagai Sumber Energi Terbarukan. Jurnal Sains dan Teknologi Lingkungan, Vol. 5(2), Hal. 67-76.
Higman, C., & Van der Berg, M. (2003). Gasification. USA: Elsevier Science.
Pranolo, H. (2010). Potensi Penerapan Teknologi Gasifikasi Tongkol Jagung Sebagai Sumber Energi Alternatif di Pedesaan. Seminar Nasional Energi Terbarukan Indonesia, Universitas Jendral Sudirman Purwokerto.
Purwantana, B., An Nurisi, M., Markumningsih, S. (2010). Kinerja Gasifikasi Limbah Padat Tebu (Saccharum Officinarum L.) Menggunakan Gasifier Unggun Tetap Tipe Downdraft. Prosiding Seminar Nasional PERTETA.
Sudarsono, dkk. (2013). Pemanfaatan Limbah Serat Pati Organik sebagai Material Komposit Poliester. Laporan penelitian hibah bersaing Institut Sains & Teknologi AKPRIND Yogyakarta. November 2013.
Sutanto, R., Nurcahyati, Pandiatmi, P., Mulyanto, A., & Wirawan, M. (2015). Pengaruh Laju Aliran Agent Gas pada Proses Gasifikasi Kotoran Kuda terhadap Karakteristik Syngas yang Dihasilkan. Proceeding Seminar Nasional Tahunan Teknik Mesin XIV (SNTTMXIV)
http://repository.ipb.ac.id/jspui/bitstream/123456789/40580/3/BAB%20II_2007aga-3.pdf
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).