Analisis Pengaruh Variasi Parameter Mesin CNC Lasser Cuting terhadap Hasil Pemotongan Material SPHC 5 mm di PT. XYZ
DOI:
https://doi.org/10.30588/jeemm.v9i1.2163Keywords:
CNC Laser Cutting, SPHC, cutting quality, cutting parameters, manufacturingAbstract
This study analyzes the effect of parameter variations on CNC Laser Cutting machines on the cutting quality of 5 mm SPHC material at PT. XYZ. The tested parameters include cutting speed, laser power, gas pressure, and the type of gas used. The research methods involve literature review, observation, and experiments with variations in cutting parameters. The results show that the proper combination of parameters significantly affects cutting quality, including edge cleanliness, oxidation levels, and surface quality. The use of high-pressure nitrogen produces cleaner and neater cuts compared to oxygen, which tends to cause oxidation. Additionally, cutting speed and laser focus position also have a significant impact on the final results. This study emphasizes that optimizing parameters in CNC Laser Cutting machines can improve efficiency and precision in the SPHC material cutting process, leading to better results in the manufacturing industry.
References
Daftar Pustaka
Amrullah, R. N., & Subagiyo, S. (2023). Effect of Current Strength and Flow Rate of Shielding Gas on the Impact and Tensile Strength of GMAW Welsing Result on SPHC Materials. LOGIC : Jurnal Rancang Bangun Dan Teknologi, 23(3), 194–202. https://doi.org/10.31940/logic.v23i3.194-202
Candra, A., Bastuti, S., & Furqon, M. A. (2019). Analisis Pengendalian Persediaan Sheet Sphc. 86–92.
Diasa, N., Suhadi, A., & Karyadi. (2023). Rekayasa Parameter Pemotongan Dengan Mesin CNC Tipe Fiber Laser Cutting A1 untuk Produk Dudukan Spring Coil. Teknobiz : Jurnal Ilmiah Program Studi Magister Teknik Mesin, 13(1), 57–62. https://doi.org/10.35814/teknobiz.v13i1.4850
Halim, G., Asroni, A., & Budiyanto, E. (2022). Analisa kerja mesin CNC laser cutting CO2 2 axis berbasis MACH3 pada variasi pemotongan. ARMATUR : Artikel Teknik Mesin & Manufaktur, 3(1), 28–36. https://doi.org/10.24127/armatur.v3i1.1935
Hidayat, M. A., Farid, A., & Suwandono, P. (2021). Analisa parameter pada pemotongan plate menggunakan CNC fiber laser cutting terhadap kekasaran permukaan. Turbo : Jurnal Program Studi Teknik Mesin, 10(2), 239–247. https://doi.org/10.24127/trb.v10i2.1737
Karyadi, K., Nanda, R. A., & Suhara, A. (2023). Analisa Cacat Timbul pada Material Aluminium Akibat Pemotongan Menggunakan Laser Cutting. VOCATECH: Vocational Education and Technology Journal, 5(1), 33–46. https://doi.org/10.38038/vocatech.v5i1.127
Lesmana, B., Heryana, G., & Jatira. (2023). Perancangan Sistem Kendali Mesin CNC (Computer Numerical Control) laser Cutting CO2 2 Axis Berbasis Arduino Uno. Journal of Applied Mechanical Technology, 2(2), 28–33. https://doi.org/10.31884/jamet.v2i2.43
Liu, X., & Chang, D. (2023). An Improved Method for Optimizing CNC Laser Cutting Paths for Ship Hull Components with Thicknesses up to 24 mm. Journal of Marine Science and Engineering, 11(3). https://doi.org/10.3390/jmse11030652
Maviroh, P. A., Karuniawan, B. W., & Rachman, F. (2017). Optimasi Kekasaran Permukaan dan Laju Pemotongan pada Mesin Laser cutting Menggunakan Material SUS 316L dengan Metode Taguchi dan Neural Network. 2654, 191–199.
Nanda, R. A., Danuarta, M., & Sunandar, A. A. (2023). Pelatihan CNC Laser Cutting Untuk Siswa SMK Plus Laboratorium Karawang: Penunjang Karir Siswa. Jurnal Pengabdian Masyarakat Dan Penelitian Terapan, 1(3), 118–129. https://doi.org/10.38035/jpmpt.v1i3
O’Con, R. L. (2015). Metal fabrication : a practical guide, Rockford, Ill. : Fabricators & Manufacturers Association.
Petunin, A., & Tavaeva, A. (2020). The Dependence of Actual Laser Cutting Speed on CNC Sheet Equipment on Number of NC Program Commands for Metal Grades 1.0114 and AWAIMg3. Journal of Physics: Conference Series, 1527(1). https://doi.org/10.1088/1742-6596/1527/1/012013
R, R., BW, K., & Juniani, A. I. (2016). Optimasi Parameter Mesin Laser Cutting Terhadap Kekasaran Dan Laju Pemotongan Pada Sus 316L Menggunakan Taguchi Grey Relational Analysis Method. J@ti Undip : Jurnal Teknik Industri, 11(2), 97. https://doi.org/10.14710/jati.11.2.97-106
Ray, H. I. o. T. K. S. (2016). Principles and Applications of Metal Rolling.
Salam, A., Mukhtar, & Trisbenheiser. (2020). Rancang Bangun Mesin CNC Laser Cutting Sebagai Media Pembelajaran. Prosiding 4th Seminar Nasional Penelitian & Pengabdian Kepada Masyarakat 2020, 173–178.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Mochammad Rajib El Atros, Hadi Nurwahyudin, Mohadly Satya Permadi (Author)
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
