Uji Performansi Mesin Pengisi Bumbu Pasta Semi Otomatis untuk Bubur Pedas Instan
DOI:
https://doi.org/10.30588/jeemm.v8i2.1925Keywords:
bubur pedas, filling machine, paste seasoning, performance test, semi-automaticAbstract
The main problem faced by the instant bubur pedas business unit is the filling of pasta seasoning in the packaging. The packaging of seasoning paste is currently done manually by putting the seasoning paste into the plastic packaging using a spoon. The weakness of the manual filling technique was that it has a small filling capacity and needs to be more practical and hygienic. Through this research, an effort was made to overcome these problems by creating a semi-automatic pasta seasoning filling system. This research aims to conduct performance tests on a semi-automatic pasta seasoning filling machine for instant bubur pedas and analyze the relationship between the rotation of the stepper motor and the mass of pasta seasoning coming out of the filling machine. The performance test carried out on the machine is in the form of an analysis of packaging time and packaging capacity. The independent variable was the number of stepper motor revolutions, ranging from 1 to 20. Based on the performance test results, the highest packaging capacity was obtained at 208 packs/hour in the treatment of stepper motor rotation one time, with the number of spices released at 3.29 grams. Increasing the mass of packaged spices requires more stepper motor revolutions, increasing the time needed for each packaging cycle. The stepper motor rotation and the mass of seasoning paste coming out of the filling machine show a consistent linear relationship with a coefficient of determination (R2) value of 0.9983. These results show that this machine can maintain the consistency of the mass of seasoning released per stepper motor rotation.
Keywords: bubur pedas, filling machine, paste seasoning, performance test, semi-automatic
References
Alfikri, M. F., Magriyanti, A. A., & Danang. (2022). Rancang Bangun Alat Pengisi Saos Berbasis Arduino UNO. Jurnal Penelitian Rumpun Ilmu Teknik, 1(2), 32–45.
Anjiu, L. D., & Suhendra, S. (2021). Modifikasi dan Uji Performansi Mesin Perontok Lada dengan Mekanisme Perontok Silinder Berjaring. Turbo, 10(2), 177–185.
Harshvardhan, R., Tambat, M., & Patil, V. (2015). Stepper Motor: A Review on Theory and Fundamentals. International Journal of Emerging Trends in Science and Technology, 02(06), 2546–2551. www.ijetst.in
Harsiti, Muttaqin, Z., & Srihartini, E. (2022). Penerapan Metode Regresi Linier Sederhana untuk Prediksi Persediaan Obat Jenis Tablet. JSiI (Jurnal Sistem Informasi), 9(1), 12–16. https://doi.org/10.30656/jsii.v9i1.4426
Istini, I. (2020). Pemanfaatan Plastik Polipropilen Standing Pouch Sebagai Salah Satu Kemasan Sterilisasi Peralatan Laboratorium. Indonesian Journal of Laboratory, 2(3), 41. https://doi.org/10.22146/ijl.v2i3.57424
Kukla, M., Tarkowski, P., Malujda, I., Talaśka, K., & Górecki, J. (2016). Determination of the Torque Characteristics of a Stepper Motor. Procedia Engineering, 136, 375–379. https://doi.org/10.1016/j.proeng.2016.01.226
Ma, C., Zhu, W., & Sun, R. (2020). Analysis and engineering realization of servo motor braking of envelope machine based on balanced impact. Solid State Technology, 63(1), 1900–1905.
Maryono. (2023). Rancang Bangun Mesin Pengemas Bumbu Pasta Instan Semi Otomatis.
Moerman, F., & Lorenzen, K. (2017). Hygienic Design of Open Food Processing Equipment. In Food Protection and Security (pp. 101–166). Elsevier. https://doi.org/10.1016/B978-1-78242-251-8.00006-0
Rahmatullah, A. S. (2021). Rancang Bangun Automatic Liquid Filling Machine Berbasis IoT (Internet of Things).
Suhendra, S., Nopriandy, F., Perdana, D., & Maryam, A. (2024). Analisis Kadar Air dan Laju Pengeringan Bahan Baku Pembuatan Bubur Pedas Instan. Jurnal Engine, 8(1), 1–6.
Suhendra, S., Pridaningsih, D. R., Jagat, L., & Nopriandy, F. (2023). Analisis Kecepatan Putar Silinder Perontok Terhadap Kinerja Mini Power Thresher Hasil Rekayasa UPJA Desa Sungai Kelambu. Engine, 7(2), 13–19.
Zaenurohman, Z., Aji, G. M., & Susanti, H. (2023). Rancang Bangun Sistem Pengisian Otomatis Merica Bubuk Berbasis Kontroler Arduino Nano. Infotekmesin, 14(2), 345–353. https://doi.org/10.35970/infotekmesin.v14i2.1923
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Suhendra, Feby Nopriandy, Winda Apriani
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
