Email this article 
.jpg)
Analisis Kekuatan Rangka Mesin Perontok Padi Menggunakan Solidworks 2019
(1) Universitas Muhammadiyah Sumatera Barat
(2) Universitas Muhammadiyah Sumatera Barat
(3) Universitas Muhammadiyah Sumatera Barat
(*) Corresponding Author
Abstract
Indonesia is one of the largest rice producers in the world. technological developments created a rice threshing machine to facilitate the work of farmers. In the manufacture of the engine frame, of course, must be calculated accurately. Here the SolidWorks 2019 application is used to make it easier to analyze the strength of the rice threshing machine frame. In the simulation of the strength of the frame using SolidWorks 2019, the type of material used is ASTM A36 Steel, and loading is carried out on the frame with a load of 1 of 50 kg and a load of 2 of 30 kg. The simulation results get the largest von misses stress value at load 2 of 79,183,792,000 N /m2 with a displacement of 0.657 mm. The safety factor values obtained from the simulation results are 3 and 2,635. Based on Dobrovolsky in the book "machine element" the safety factor range for dynamic loads is 2.0 - 3.0, then the strength of the frame of the rice thresher machine is able to support the performance of the machine during use.
Keywords
Full Text:
PDFReferences
Aji Abdillah Kharisma, & Muhammad Erlian Marsaoly. (2021). Analisis Kegagalan pada Rangka Mesin Perontok Padi Kapasitas 1 Ton/Jam Menggunakan Metode Von Misses. Jurnal Rekayasa Mesin, 20(2), 13–18. Retrieved from https://doi.org/10.36706/jrm.v20i2.64
Anonim. (n.d.). Kuliah Umum Perkembangan Teknologi CAD 3D SolidWorks dan Penerapannya di Industri Manufaktur. Retrieved 22 August 2022, from https://mechanical.uii.ac.id/kuliah-umum-perkembangan-teknologi-cad-3d-solidworks-dan-penerapannya-di-industri-manufaktur/
Anonim. (2018). Jenis dan Bentuk Baja Profil (structural steel). Retrieved 22 August 2022, from https://www.etsworlds.id/2018/08/jenis-dan-bentuk-baja-profil-structural.html
Ari, L., Wibawa, N., Uji, B., Antariksa, P., Penerbangan, L., Lapan, A. N., & Cilauteureun, J. (2019). 45 Wibawa , Lasinta Ari Nendra ; Desain Dan Analisis Kekuatan Rangka Lemari Perkakas Di 46 Wibawa , Lasinta Ari Nendra ; Desain Dan Analisis Kekuatan Rangka Lemari Perkakas Di Balai Lapan Garut Menggunakan Metode Elemen Hingga, 5(2), 45–50.
Isworo, F. (2018). Mekanika Kekuatan Material I (Hmkk319). Buku Ajar, 19–22.
Kayu, P., & Baja, D. A. N. (1999). KAJIAN SIFAT MEKANIKAL DAN KOMPOSISI ELEMEN BATANG PROFIL L BERBAHAN FERROCEMENT SEBAGAI MATERIAL ALTERNATIF PENGGANTI KAYU DAN BAJA Remigildus Cornelis (, 120–131.
Isworo, H., Ghofur, A., Cahyono, G. R., & Riadi, J. (2019). Analisis Dissplacement Pada Chassis Mobil Listrik WasakaAnalisis Dissplacement Pada Chassis Mobil Listrik Wasaka. Elemen : Jurnal Teknik Mesin, 6(2), 94. Retrieved from https://doi.org/10.34128/je.v6i2.103
Kelik, V., Hengky, H., & Kurniawan, D. (2016). Perancangan Mesin Pengupas Dan Pemisah Kulit Buah Kopi Kering. Jurnal Teknik Mesin, 5(2), 28. Retrieved from https://doi.org/10.22441/jtm.v5i2.711
Kharisma, A. A., & Marsaoly, M. E. (2020). Analisis Kegagalan Pada Rangka Mesin Perontok Padi Kapasitas 1 Ton / Jam Menggunakan Metode Von Misses, 20(2), 13–18.
Langi, J. L., Ludong, D. P. M., & Lengkey, L. C. C. E. (2020). Rekayasa Mesin Pengupas Kulit Buah Kopi Jenis Robusta Model Tep-Jll 2015 Di Kabupaten Tana Toraja. Jurnal Teknologi Pertanian (Agricultural Technology Journal, 11(1). Retrieved from https://doi.org/10.35791/jteta.11.1.2020.29983
Mesin, D. T., Teknik, F., Surabaya, U. N., Mesin, J. T., Teknik, F., & Surabaya, U. N. (n.d.). ANALISA PEMBUATAN MESIN PENGUPAS KULIT KOPI MENGGUNAKAN METODE QFD Heri Susanto, 23–27.
Khasanah;Dkk, isnaeni N. (2021). LUAS PANEN DAN PRODUKSI PADI DI INDONESIA 2020. ( dan P. Direktorat Statistik Tanaman Pangan, Hortikultura,Ed.). Badan Pusat Statistik.
Rupajati, P., Arif, S., & Suastiyanti, D. (2016). Rancang Bangun Mesin Perontok Padi ( Paddy Thresher ) dalam Upaya Peningkatan Kualitas dan Efisiensi Produksi Beras Pasca Panen, 2016(Snips), 1–4.
Setiawan, A., Dharma, U. S., & Budiyanto, E. (n.d.). Pengaruh jenis bahan dan jumlah gigi perontok terhadap kinerja mesin thresher sebagai perontok padi.
Suprayogi, A., & Tjahjanti, P. H. (2017). Analisa Surface Preparation pada Plat Baja ASTM A36. Seminar Nasional Dan Gelar Produk, 188–197.
Team Lab CAR, & Gambar Teknik. (2016). Analisis & simulasi sistem mekanikal dengan software SOLIDWORKS, 1–55.
DOI: https://doi.org/10.30588/jeemm.v6i2.1201
Article Metrics
Abstract view : 329 timesPDF - 14 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2022 Ismail Furqani
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Engine: Energi, Manufaktur, dan Material is licensed under a Creative Commons Attribution 4.0 International License.
