Analisis Kekuatan Rangka Mesin Perontok Padi Menggunakan Solidworks 2019
DOI:
https://doi.org/10.30588/jeemm.v6i2.1201Keywords:
paddy, machine frame, ASTM A36 Steel, solidworks 2019, machine elementAbstract
Indonesia is one of the largest rice producers in the world. technological developments created a rice threshing machine to facilitate the work of farmers. In the manufacture of the engine frame, of course, must be calculated accurately. Here the SolidWorks 2019 application is used to make it easier to analyze the strength of the rice threshing machine frame. In the simulation of the strength of the frame using SolidWorks 2019, the type of material used is ASTM A36 Steel, and loading is carried out on the frame with a load of 1 of 50 kg and a load of 2 of 30 kg. The simulation results get the largest von misses stress value at load 2 of 79,183,792,000 N /m2 with a displacement of 0.657 mm. The safety factor values obtained from the simulation results are 3 and 2,635. Based on Dobrovolsky in the book "machine element" the safety factor range for dynamic loads is 2.0 - 3.0, then the strength of the frame of the rice thresher machine is able to support the performance of the machine during use.
References
Aji Abdillah Kharisma, & Muhammad Erlian Marsaoly. (2021). Analisis Kegagalan pada Rangka Mesin Perontok Padi Kapasitas 1 Ton/Jam Menggunakan Metode Von Misses. Jurnal Rekayasa Mesin, 20(2), 13–18. Retrieved from https://doi.org/10.36706/jrm.v20i2.64
Anonim. (n.d.). Kuliah Umum Perkembangan Teknologi CAD 3D SolidWorks dan Penerapannya di Industri Manufaktur. Retrieved 22 August 2022, from https://mechanical.uii.ac.id/kuliah-umum-perkembangan-teknologi-cad-3d-solidworks-dan-penerapannya-di-industri-manufaktur/
Anonim. (2018). Jenis dan Bentuk Baja Profil (structural steel). Retrieved 22 August 2022, from https://www.etsworlds.id/2018/08/jenis-dan-bentuk-baja-profil-structural.html
Ari, L., Wibawa, N., Uji, B., Antariksa, P., Penerbangan, L., Lapan, A. N., & Cilauteureun, J. (2019). 45 Wibawa , Lasinta Ari Nendra ; Desain Dan Analisis Kekuatan Rangka Lemari Perkakas Di 46 Wibawa , Lasinta Ari Nendra ; Desain Dan Analisis Kekuatan Rangka Lemari Perkakas Di Balai Lapan Garut Menggunakan Metode Elemen Hingga, 5(2), 45–50.
Isworo, F. (2018). Mekanika Kekuatan Material I (Hmkk319). Buku Ajar, 19–22.
Kayu, P., & Baja, D. A. N. (1999). KAJIAN SIFAT MEKANIKAL DAN KOMPOSISI ELEMEN BATANG PROFIL L BERBAHAN FERROCEMENT SEBAGAI MATERIAL ALTERNATIF PENGGANTI KAYU DAN BAJA Remigildus Cornelis (, 120–131.
Isworo, H., Ghofur, A., Cahyono, G. R., & Riadi, J. (2019). Analisis Dissplacement Pada Chassis Mobil Listrik WasakaAnalisis Dissplacement Pada Chassis Mobil Listrik Wasaka. Elemen : Jurnal Teknik Mesin, 6(2), 94. Retrieved from https://doi.org/10.34128/je.v6i2.103
Kelik, V., Hengky, H., & Kurniawan, D. (2016). Perancangan Mesin Pengupas Dan Pemisah Kulit Buah Kopi Kering. Jurnal Teknik Mesin, 5(2), 28. Retrieved from https://doi.org/10.22441/jtm.v5i2.711
Kharisma, A. A., & Marsaoly, M. E. (2020). Analisis Kegagalan Pada Rangka Mesin Perontok Padi Kapasitas 1 Ton / Jam Menggunakan Metode Von Misses, 20(2), 13–18.
Langi, J. L., Ludong, D. P. M., & Lengkey, L. C. C. E. (2020). Rekayasa Mesin Pengupas Kulit Buah Kopi Jenis Robusta Model Tep-Jll 2015 Di Kabupaten Tana Toraja. Jurnal Teknologi Pertanian (Agricultural Technology Journal, 11(1). Retrieved from https://doi.org/10.35791/jteta.11.1.2020.29983
Mesin, D. T., Teknik, F., Surabaya, U. N., Mesin, J. T., Teknik, F., & Surabaya, U. N. (n.d.). ANALISA PEMBUATAN MESIN PENGUPAS KULIT KOPI MENGGUNAKAN METODE QFD Heri Susanto, 23–27.
Khasanah;Dkk, isnaeni N. (2021). LUAS PANEN DAN PRODUKSI PADI DI INDONESIA 2020. ( dan P. Direktorat Statistik Tanaman Pangan, Hortikultura,Ed.). Badan Pusat Statistik.
Rupajati, P., Arif, S., & Suastiyanti, D. (2016). Rancang Bangun Mesin Perontok Padi ( Paddy Thresher ) dalam Upaya Peningkatan Kualitas dan Efisiensi Produksi Beras Pasca Panen, 2016(Snips), 1–4.
Setiawan, A., Dharma, U. S., & Budiyanto, E. (n.d.). Pengaruh jenis bahan dan jumlah gigi perontok terhadap kinerja mesin thresher sebagai perontok padi.
Suprayogi, A., & Tjahjanti, P. H. (2017). Analisa Surface Preparation pada Plat Baja ASTM A36. Seminar Nasional Dan Gelar Produk, 188–197.
Team Lab CAR, & Gambar Teknik. (2016). Analisis & simulasi sistem mekanikal dengan software SOLIDWORKS, 1–55.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
