Analisis Bahaya Dan Penilaian Risiko Kerja Menggunakan Metode HIRARC di Area Produksi PT. Kurnia Luwuk Sejati
Pendekatan HIRARC dan FMEA dalam Pengendalian Risiko K3
Keywords:
Occupational Safety, HIRARC, Risk Level, FMEA, RPNAbstract
Occupational Health and Safety (OHS) is a crucial aspect in the palm oil processing industry due to the high potential hazards present in the production area. This study aims to identify potential hazards, assess occupational risk levels, and determine risk control priorities in the production area of PT. Kurnia Luwuk Sejati using the Hazard Identification, Risk Assessment, and Risk Control (HIRARC) method and Failure Mode and Effects Analysis (FMEA). This research employed a quantitative descriptive approach with data collected through observation, interviews, and documentation. The HIRARC results indicate that the Sterilizer, Tippler, and Boiler stations have risks classified as medium to high, with risk level values ranging from 5 to 12. The highest risks were found at the Tippler station (risk level 10) and the Boiler station (risk level 12). Further analysis using FMEA shows that the highest Risk Priority Number (RPN) values were identified at the Sterilizer station (RPN 350), the Tippler station (RPN 180), and the Boiler station (RPN 252). The recommended risk control measures include engineering controls, administrative controls, and consistent use of personal protective equipment (PPE) to reduce occupational risk levels.
Keywords: Occupational Safety, HIRARC, Risk Level, FMEA, RPN.
References
Dewiyana, Pramanda, R., Nurmalawati, & Saragih, H. A. F. (2024). Analisis Potensi Bahaya pada Stasiun Sterilizer di PTPN IV PKS Tanjung Seumantoh Menggunakan Metode Job Safety Analysis (JSA). Industrial & System Engineering Journals (ISEJOU), 3(1), 219–228. https://doi.org/10.37477/isejou.v3i1.724
Firdaus, D. S., Widodo, L., & Adianto. (2023). Implementasi Risiko Kecelakaan Kerja pada Proses Produksi Makanan Ringan dengan Menggunakan Metode HIRARC, HAZOP, dan FMEA (Studi Kasus pada PT. Indofood Fortuna Makmur). Jurnal Mitra Teknik Industri, 2(1), 56–65. https://doi.org/10.24912/jmti.v2i1.25527
Hasanah, S., Fuady, C. H., & Yuniarti, T. (2024). The Influence of Safety, Occupational Health (K3), and Work Discipline on Employee Performance Construction Project PT. Sasak Indo Raya. The Eastasouth Management and Business, 3(1), 194–207. https://doi.org/10.58812/esmb.v3i1.320
Hendro, V., & Apsari, A. E. (2023). Pengendalian Risiko Bahaya Kecelakaan dengan Metode Failure Mode and Effect Analysis (FMEA) dan Hazard Identification Risk Assessment (HIRA). Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(2), 333–340. https://doi.org/10.51903/juritek.v3i2.1872
Hidayat, M. C., & Nuruddin, Moch. (2022). Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (jsa) Dengan Pendekatan Hazard Identification, Risk Assessment and Risk Control (hirarc) (studi Kasus Pt. Smelting Plan Refinery). JUSTI (Jurnal Sistem Dan Teknik Industri), 2(4), 557. https://doi.org/10.30587/justicb.v2i4.4243
Ihsan, T., Sajidah, H., Edwin, T., & Derosya, V. (2025). Identifikasi dan Pengendalian Risiko K3 pada Proses Produksi CPO dengan Metode HIRARC. Jurnal Kesehatan Komunitas (Journal of Community Health), 11(1), 120–130. https://doi.org/10.25311/keskom.Vol11.Iss1.2107
Ilmi, N. (2025). Analysis of Occupational Health and Safety Risks in the Palm Oil Processing Industry Using the HIRARC Method. Journal of Industrial System Engineering and Management, 4(1), 21–26. https://doi.org/10.56882/jisem.v4i1.45
Lalenoh, D. H., Dundu, A. K. T., & Lefrandt, Lucia. I. R. (2023). Identifikasi Bahaya dan Penilaian Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Proyek Runway dan Taxiway Bandara Lolak Bolaang Mongondow Menggunakan Metode Hirarc. Syntax Literate ; Jurnal Ilmiah Indonesia, 7(9), 15862–15878. https://doi.org/10.36418/syntax-literate.v7i9.13723
Mastam, N. A., Sartika, & Septiyanti. (2024). Identifikasi Bahaya Menggunakan Metode Hazard Identification Risk Assesment And Risk Control (HIRARC) Dalam Memperkecil Risiko Kecelakan Kerja Pada PT. Maruki Internasional Indonesia Makassar. Window of Public Health Journal, 5(5), 621–628. https://doi.org/10.33096/woph.v5i5.2048
Mukti, I., Ningsih, T., & Sibuea, I. L. (2023). Kajian Pengendalian Resiko Keselamatan dan Kesehatan Kerja dengan Metode Hazard Indentification Risk Assessment and Risk Control (HIRARC) Di PT. Langkat Nusantara Kepong. Jurnal Agro Fabrica, 5(1), 32–39. https://doi.org/10.47199/jaf.v5i1.167
Rahman, A., Fitriyani, C., Ananda, G. R., & Rauzah, S. (2025). Implementation of Occupational Safety and Health Using the Hiradc Method (Hazard Identification, Risk Assessment, And Determining Control) in Palm Oil Plants: Literature Review. International Conference on Public Health. https://journal.utu.ac.id/index.php/ICPH/article/view/170/74
Ramadhanti, C., Rahmadani, A. R., & Dewanti, D. W. (2023). Identifikasi Bahaya dan Penilaian Risiko (IBPR) Menggunakan Metode HIRARC pada PT XYZ. Jurnal Ilmiah Teknologi Infomasi Terapan, 9(2). https://doi.org/10.33197/jitter.vol9.iss2.2023.995
Rusnita, E., & Rachman, G. F. (2025). Identifikasi Potensi Bahaya dan Usulan Mitigas Bahaya pada Area Gudang Produksi Menggunakan Metode Job Safety Analysis (JSA). JTIM, 1(2), 51–58.
Salam, R. S., Ikhsanudin, & Susanto, E. (2025). Analysis Of Potential Hazards And Risk Assessment Using The Hirarc (Hazard Identification Risk Assessment And Risk Control) Method As An Effort To Prevent Work Accidents At Pt Tunas Ridean Tbk Serang. TOFEDU: The Future of Education Journal, 4(4), 965–978. https://doi.org/10.61445/tofedu.v4i4.522
Satriatama, F. (2025). Analisis Potensi Risiko Keselamatan dan Kesehatan Kerja dengan Metode Hazard Identification, Risk Assessment, and Risk Control (HIRARC) pada Balai Industri Logam dan Kayu (instalasi Industri Logam Semarang). Industrial Engineering Online Journal, 14(3). https://ejournal3.undip.ac.id/index.php/ieoj/article/view/51667/33868
Sulaiman, Y. A., Reza Firnanda, Sindy Nindia M.H, Lutfia Agustin, & And Ach. Dafid. (2025). Occupational Health and Safety Risk Assessment Application in Oil Refinery Using Hazard Identification, Risk Assessment and Risk Control (HIRARC). Tibuana, 8(2), 110–119. https://doi.org/10.36456/tibuana.8.2.10502
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Krisna Chandra Chanel, Enda Apriani, Mutiara Dicinta
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with Jurnal Teknik Industri Manajemen dan Manufaktur agree to the following terms:
Authors retain copyright and grant the Jurnal Teknik Industri Manajemen dan Manufaktur right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Teknik Industri Manajemen dan Manufaktur
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Teknik Industri Manajemen dan Manufaktur. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
