Pembuatan Alat Pengering Cocopeat dengan Sistem Hybrid Berbasis Panel Surya
DOI:
https://doi.org/10.30588/jeemm.v6i2.1235Keywords:
cocopeat, dryer tool, hybrid, making process, solar panelAbstract
The purpose of this study was to describe the process and results of making cocopeat dryers with a hybrid system based on solar panels. This research was conducted with a tool development method consisting of five steps, namely literature study, design, tool and material preparation, manufacturing, and functional tests. The study results were (1) the process of making cocopeat dryers with a hybrid system based on the solar panel was the calculation of solar panel components, frame making, coating of frames with the casing, assembling of electronic components, and functional tests. (2) The cocopeat dryer with a hybrid system based on solar panels that have been made has dimensions of 120 cm in length, 60 cm in width, and 130 cm in height—equipped with a 100 Wp solar panel, a 12 V 65Ah dry battery, a 600 W inverter, three 15W halogen lamps, and a 22W fan. (3) The functional test results show that the average temperature inside the dryer is 52.84oC, 8.56oC higher than the temperature outside the tool. The average humidity inside the dryer is 23.4%, 17.2% lower than the humidity outside the appliance.
References
Anibta, E. D., Hasan, H. dan Syukriyadin, S. 2019. Perancangan sistem monitoring dan switching control hubungan seri-paralel panel surya. Seminar Nasional dan Expo Teknik Elektro. Banda Aceh: 66 – 71Siregar dkk, 2021.
Ayu, D.P., Puti, E.R.P., Izza, P.R., dan Nurkhamamah, Z. 2021. Pengolahan limbah serabut kelapa menjadi media tanam cocopeat dan cocofiber di Dusun Pepen. Jurnal Praktis dan Dedikasi. 4(2): 93-100.
Fachruddin, I. 2017. Prototype kontrol otomatis pergerakan panel surya mengikuti sumber cahaya menggunakan arduino. Skripsi. Jurusan Fisika, Fakultas Matematika dan Ilmu Pengetahuan Alam, Universitas Negeri Semarang. Semarang.
Feriady, A., Efrita, E., & Yawahar, J. 2021. Pembuatan cocopeat sebagai upaya peningkatan nilai tambah sabut kelapa. Jurnal Pengabdian Masyarakat Bumi Raflesia. 3(3): 406-416.
Gunoto, P., Sofyan, S. 2020. Perancangan pembangkit listrik tenaga surya 100 Wp untuk penerangan lampu diruang selasar Fakultas Teknik Universitas Riau Kepulauan. Sigma Teknika. 3(2): 96-106.
Hardianti, N., Damayanti, R,W., dan Fahma, F. 2017. Faktor-faktor yang mempengaruhi proses pengeringan simplisia menggunakan solar dryer dengan konsep udara ekstra. Prosiding SNST Ke-8 Tahun 2017 Fakultas Teknik Universitas Wahid Hasyim Semarang. : 6-11.
Hatta, M., Syuhada, A., dan Fuadi, Z. 2019. Sistem pengering ikan dengan metode hybrid. Jurnal Polimesin. 17(1): 9-18.
Irwan, A. dan Hidayah, N. 2014. Kesesuaian penggunaan cocopeat sebagai media sapih pada polytube dalam pembibitan cempaka (Magnolia elegans (Blume.) H.Keng). Jurnal Wasian. 1(2): 73 – 76.
Mukkun, Y. dan Dana, S. 2016. Pembuatan alat pengering ikan ramah lingkungan dengan menggunakan integrasi panel surya dan sinar matahari langsung. Jurnal Ilmiah Flash. 2(1): 19-25.
Ramadhan, D., Riniarti dan Santoso, T. 2018. Pemanfaatan cocopeat sebagai media tumbuh sangon laut (Paraserianthes falcataria) dan merbau darat (Intsia palembanica). Jurnal Sylva Lestari. 6(2): 22 – 31.
Sepriyanto dan Subama. 2018. Pengaruh lama perendalam sabut kelapa terhadap hasil cocofiber dan cocopeat buah kelapa dari Daerah Jambi. Jurnal Inovator. 1(2): 22 – 25.
Suryadi, Sukmawaty, dan Putra G.M.D. 2017. Scale Up dan uji Teknis alat pengering tipe fluidized bed dryer. Jurnal Ilmiah Rekayasa pertanian dan Biosistem. 5(2): 452-461.
Sutrisno, Arvian, F., Syah, A.F., Kusumawardhany, Y.P., Putri, R.A., dan Wahyudi, M.A. 2021. Alat pengering ikan otomatis berbasis panel surya untuk pedagang ikan di Desa Prigi kabupaten Trenggalek. Jurnal Graha Pengabdian. 3(1): 29-37.
Syahrul S., Romdhani, R., dan Mirmato. 2016. Pengaruh variasi kecepatan udara dan massa bahan terhadap waktu pengeringan jagung pada alat fluidized bed. Dinamika Teknik Mesin: Jurnal Keilmuan dan Terapan Teknik Mesin. 6(2): 120 -126.
Downloads
Additional Files
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
