Face Mask Detector and Temperature Skrining Using IoT
DOI:
https://doi.org/10.30588/jeemm.v6i2.1118Keywords:
Arduino, Body Temperature, Face Mask Detector, ServoAbstract
The coronavirus outbreak hit the world in early 2020, including Indonesia. Health protocols such as wearing masks, maintaining distance, checking body temperature, and washing hands are carried out to prevent the spread of the coronavirus. Therefore, this research aims to build an Internet of Things (IoT) based system to detect the use of masks and body temperature measurements as well as the use of doorstops as a condition of whether users can enter the environment or not. Observations, questionnaires, and interviews were also conducted to collect data to see the use of existing health protocols and respondents' opinions on the application of IoT in the health sector, especially the application of health protocols. The observation results showed that there were still many people who did not use masks and did not check their body temperature if they wanted to enter a place. The results of questionnaires and interviews were obtained with 93% saying yes that the built product was feasible and would help the spread of the coronavirus. The implementation of Arduino system design, ultrasonic sensors, python programming, and OpenCV resulted in a hardware design that is able to detect masks and body temperature without direct interaction between security officers and guests/students. The result is that if you don't use a mask, the alarm sounds, but if you wear a mask, the alarm doesn't sound. If the temperature is detected above 37.50 C, the servo will be closed which means that the user cannot enter the location, while if the temperature is detected below 37.50 C, the servo will open.
References
Achlison, U. (2020). Analisis Implementasi Pengukuran Suhu Tubuh Manusia dalam Pandemi Covid-19 di Indonesia,. J. Ilm. Komput. Graf., Vol.13 No. 2, 102–106.
Ardiyansah, I., & Nurpulaela, L. (2021). Sistem Pengukuran Suhu Tubuh Otomatis Berbasis Arduino Sebagai Alat Deteksi Awal COVID-19. Jurnal Orang Elektro, Vol.10 No.2.
B.R. Babu, B. Anudeep, M. Yugma, M.S, Meghana, and S. Swami, S. (2019). Real-Time Iot Based Office Automation System Using Nodemcu Esp8266 Module. International Journal of Research, 250–254.
Buana, D. R. (2020). Analisis Perilaku Masyarakat Indonesia dalam Menghadapi Pandemi Virus Corona (Covid-19) dan Kiat Menjaga Kesejahteraan Jiwa. Jurnal Sosial Dan Budaya Syar-I, Vol.7 No.3, 217.
F. Sirait, and Y. (2020). Pemanfaatan raspberry pi sebagai processor pada pendeteksian dan pengenalan pola wajah. Jurnal Teknologi Elektro, Vol. 3, No.7.
Feriandy, Y. (2020). COVID-19 dan Manajemen Bencana. UNISBA. http://repository.unisba.ac.id:8080/xmlui/bitstream/handle/123456789/2674%0A3/fulltext_bc_16_feriandi_kopidpedia_fk_p2u_unisba_2020.pdf?sequence= 1%0A
Fikri, M. F. R., Fikri, M. F. R., Ya’umar, Y., & Suyanto, S. (2013). Rancang Bangun Prototipe Monitoring Suhu Tubuh Manusia Berbasis O.S Android Menggunakan Koneksi Bluetooth. Jurnal Teknik ITS, Vol.2 No. 1. A213–A216. https://doi.org/10.12962/j23373539.v2i1.3275
Hafidz, Saguh Al. 2017. “Pengembangan Fitur User Menu Dengan Menambahkan Fungsi Residual Soldering Check Untuk Desain Layout Pcb Menggunakan Aplikasi Zuken Cr-5000.” Open Journal System UNIKOM: 10111130.
Kemenkes RI. (2021). Buku Saku Pelacakan Kontak (Contact Tracing) Kasus COVID-19. 40.
Kumar, S. Surya, M. N. S. S, S. Suranthar, and M. K. A. (2021). Automatic Covid-19 Face Mask And Body Temperature Detection With. Vol. 9 No. 4, 255–259.
Liao, M., Liu, H., Wang, X., Hu, X., Huang, Y., Liu, X., Brenan, K., Mecha, J., Nirmalan, M., & Lu, J. R. (2021). A technical review of face mask wearing in preventing respiratory COVID-19 transmission. Current Opinion in Colloid and Interface Science, Vol. 52. https://doi.org/10.1016/J.COCIS.2021.101417
P. W. Rusimamto, R. Harimurti, Endryansyah, Y. Anistyasari, and L. A. (2020). Design and Implementation of Thermal Body System Employing Thermal Sensor MLX 90614 for Covid-19 Symptoms Early Detector: In International Joint Conference on Science and Engineering. https://doi.org/10.2991/aer.k.201124.058
Panjaitan, Bosar, and Rifki Ryan Mulyad. 2020. “Rancang Bangun Sistem Deteksi Kebakaran Pada Rumah Berbasis IoT.” Angewandte Chemie International Edition, Vol. 6 No. 11, 951–952.
Paramananda, R. G., Fitriyah, H., &, & Prasetio, B. H. (2018). Rancang Bangun Sistem Penghitung Jumlah Orang Melewati Pintu menggunakan Sensor Infrared dan Klasifikasi Bayes. Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer (J-PTIIK), Vol. 1 No. 3, 921.
Prasetya, A., Ihsanto, E., & Dani, A. W. (2021). Rancang Bangun Pendeteksi Wajah Bermasker Dan Tidak Bermasker Dalam Absensi Di Masa Pandemi COVID-19 Menggunakan Convolutional Neural Network. Jurnal Teknologi Elektro. Jurnal Teknologi Elektro, Vol.1 No. 12, 37–44. https://doi.org/https://doi.org/10.22441/jte.2021.v12i2. 006
Prata, Joana C. et al. 2020. “COVID-19 Pandemic Repercussions on the Use and Management of Plastics.” Environmental Science and Technology, Vol. 54 No. 13: 7760–65.
Protsiv, Myroslava et al. 2020. “Decreasing Human Body Temperature in the United States since the Industrial Revolution.” eLife Vol. 9
Putra, Genta Subni Ananda, Ariza Nabila, and Ali Basrah Pulungan. 2020. “Power Supply Variabel Berbasis Arduino.” JTEIN: Jurnal Teknik Elektro Indonesia Vol. 1 No. 2 : 139–43.
Putra, W. A., Maulana, R., & Utaminingrum, F. (2018). Implementasi Sistem Otomatisasi Pintu Dengan Face Recognition Menggunakan Metode Haar-Cascade Dan Local Binary Pattern Pada Raspberry Pi. Jurnal Pengembangan Teknologi Informasi Dan Ilmu Komputer (J-PTIIK) Vol. 2 No. 12, 6997–7006.
Savitri dan Diah E. 2020. “Gelang Pengukur Detak Jantung Dan Suhu Tubuh Manusia Berbasis Internet of Things (IoT).” UIN Syarif Hidayatullah Jakarta: 1–87.
Urbach, Tandini Ulfa, and Wildian Wildian. 2019. “Rancang Bangun Sistem Monitoring Dan Kontrol Temperatur Pemanasan Zat Cair Menggunakan Sensor Inframerah MLX90614.” Jurnal Fisika Unand Vol. 8 No.3 : 273–80.
Vince, Tibor et al. 2020. “IoT Implementation in Remote Measuring Laboratory VMLab Analyses.” Journal of Universal Computer Science Vol. 26 No. 11: 1402–21.
Wahyu Kencana, A. (2020). Rancang Bangun Alat Otomatis Hand Sanitizer Dan Ukur Suhu Tubuh Mandiri Untuk Pencegahan Covid-19 Berbasis IOT. Jurnal Transit, Vol.1. No. 6
Wicaksono, M., & D., R. M. (2020). Implementasi Arduino Uno dan ESP32 Cam untuk Smart Home. Universitas Komputer Indonesia.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with Jurnal Engine: Energi, Manufaktur, dan Material agree to the following terms:
Authors retain copyright and grant the Jurnal Engine: Energi, Manufaktur, dan Material right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share (copy and redistribute the material in any medium or format) and adapt (remix, transform, and build upon the material) the work for any purpose, even commercially with an acknowledgment of the work's authorship and initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Jurnal Engine: Energi, Manufaktur, dan Material. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
