Pengaruh Perubahan Diameter Lubang Saluran Keluar Jetmain dari 2,5 mm menjadi 2,8 mm pada Karburator terhadap Kinerja Mesin Bensin Empat Langkah Satu Silinder pada Sepeda Motor

Wardoyo Wardoyo(1*), Andi Putro Sukendro(2),

(1) Universitas Proklamasi 45 Yogyakarta
(2) Universitas Proklamasi 45 Yogyakarta
(*) Corresponding Author

Abstract


This study aimed to compare the influence of the hole diameter of the outlet of the main jet from 2.5 mm to 2.8 mm on the carburetor to the engine performance and fuel consumption.The test is performed with the brand gasoline motor honda tiger type GL 200 R  four-stroke single cylinder. The materials studied were the main jet. Tests performed with standard conditions in without making any changes. Testing machine at the ready on a dynamometers test bed. Then do the testing phase and retrieval of data that is torque and fuel consumption. Torque (Nm) play a modified jet yield increase of 2.2% from the main jet standard. Power (kW) jet modification produces a maximum power of around 2.2% of the main jet standard. The rate of fuel consumption (mf) on the main jet modification is greater than the main jet standard. Fuel consumption (sfc) on the main jet modification will further increase the standard of the main jet. Calorific fuel (Qi) in the main jet modification is greater than the main jet standard. Jet played modifications that do not significantly change the main jet standard.

Keywords


main jet; fuel; power

Full Text:

PDF

References


Arends, B. P. M. & Berenscot, H. (1980). Motor Bensin. (Alih Bahasa: Sukrisno, U.) Jakarta: Penerbit Erlangga.

Arismunandar, W. (2002). Penggerak Mula Motor Bakar Torak. Bandung: ITB Bandung.

Cengel, Y. A. & Boles, M. A. (1994). Thermodynamics: an Engineering Approach. New York: McGraw-Hill.

Daryanto. (2003). Motor Bensin pada Mobil. Bandung: Yrama Widya.

Ferguson, C. R. (1986). Internal Combustion Engines: Applied Thermosciences, Purdue University.

Heywood, L. B. (1988). Internal Combustion Engine Fundamentals. Singapore: McGraw-Hill.

Maleev, V. L. (1973). International Critical Tables (Vol. 1). New York: McGraw-Hill.

Obert, F.E. (1973). Internal Combustion Engines and Air Pollution (3rd Edition). New York: Harper & Row Publishing.

Timing. (2006). Manifold Powerman. Motor Plus Edisi 326.

Edwin. (2004). Manifold Powerman. Komoditas Honda Tiger Indonesia.




DOI: https://doi.org/10.30588/jeemm.v1i1.224

Article Metrics

Abstract view : 547 times
PDF - 16 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2017 Wardoyo Wardoyo, Andi Putro Sukendro



Creative Commons License
Jurnal Engine: Energi, Manufaktur, dan Material is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Engine: Energi, Manufaktur, dan Material has been indexed by:
              
 
 
Free counters!
 
Jurnal Engine: Energi, Manufaktur, dan Material  
Office: Soekarno Building, 2nd Floor, Jl. Proklamasi No. 1, Babarsari, Yogyakarta (55281)
Email: jurnal.engine@up45.ac.id; jeemm.up45@gmail.com
ISSN (online): 2579-7433